单头绣花机TMBR田岛单头机供应，详情咨询田岛李代表13928305141
机型：TMBR - S1501C系列
15针,单头,超大刺绣面积：360x500mm
最前沿技术：D C P数控压脚、多色绳绣、精致手绣功能等
包罗万象的成品绣花框，满足更多元化的成品刺绣需求
采用数控压布脚，轻松简单地在厚面料和皮革上做出精致刺绣
专利数控压布脚，可根据面料厚薄程度调整，减低对所绣面料造成的压痕或损坏；同时，优化压布脚压布时间，有效防止所绣面料颤动走位，提升精致刺绣新标准。专利数控压布脚对应多元化各式各样面料，广泛适用于皮革、厚布料、弹性面料、绗缝夹棉类面料上。
TMBR-SC series
Electronic Single-Head Automatic Embroidery Machine
The next generation mode with the Digitally Controlled Presser Foot "DCP"
A wide area can be secured all around the frame, It can be easily installed for quick changeover with minimal down time.
The air clamp makes large sized bags easy to embroider.
It can also embroider on slim items like socks.
What is the DCP
The machine can embroider on thick material or seamed sections without fluttering due to Tajima’s latest feature.
DCP is an abbreviation for Digitally Controlled Presser Foot. Moving “Presser Foot” to press the fabric by the motor presses surely.
As the lowest point of Presser Foot can be easily set on the operation panel according to the thickness of fabric,
There are no worries about damage to the fabric by the presser foot. And it is very efficient for 3D embroidery using urethane on cap.
The FS mode is good for loosely twisted thread
The FS mode is best suited for loosely twisted threads as it can embroider this type of fine thread with a high quality finish.
By using the FS mode exclusive parts (sold separately) a nice lofty finish can be achieved.
It can easily embroider on sleeves or pockets
With the new type slim cylinder that has been reduced by 12% in width, it is even better for working on children’s wear or smaller pockets.
Network
Embroidery data can be easily sent to the machines by connecting the embroidery software to a network.
For name tag embroidery, autograph is recommended as it simplifies the process. In addition to the DG/ML,
it allows for the smoothest design date generation and transmission to the machine.
单头绣花机TMBR田岛单头机供应，详情咨询田岛李代表13928305141，微信/QQ 1767761209
